-
What does a seraphim look like? Isn't that an angel?
-
Which solar module specifications should I compare?
-
Should I pay extra for higher module efficiency?
-
Is a Tier 1 PV module manufacturer automatically a safe choice?
-
How do I actually evaluate a PV module manufacturer?
-
Why shouldn't I just pick the lowest price per watt?
-
What should I check when the modules arrive on site?
I run procurement for a 45-person commercial solar EPC. Since 2020 I've been responsible for a module buying budget of roughly $4M a year. In that time I've been through about 20 formal RFQs with PV module manufacturers, audited several factories, and read plenty of datasheets that promised more than they delivered.
Developers and clients keep asking me the same things: How do I read solar module specifications? Which manufacturer should I use? Is this brand any good? This FAQ is the short version of the conversation I end up having over and over. No marketing fluff, just what I actually check before spending money.
What does a seraphim look like? Isn't that an angel?
If you searched for 'what does a seraphim look like' and landed here, you were probably looking for the biblical kind of seraphim, the six-winged celestial beings described in Isaiah. That is a different topic, and honestly, theology is not my department.
In the solar world, Seraphim is a PV module manufacturer. The name comes from the same word, but the product is a lot more practical: rectangular solar panels. The ones we install look like most modern crystalline modules, dark monocrystalline cells under tempered glass, a black or silver frame, and a junction box on the back. If you are buying for a project, the visual appearance matters less than the spec sheet, but you should still confirm physical dimensions, weight, and packaging details before you commit to racking and logistics.
Which solar module specifications should I compare?
Every manufacturer publishes a datasheet. The problem is that not all specs are equally useful when you compare bids. Here is what I put into our comparison template:
- Pmax and power tolerance. Pmax is the nameplate wattage at STC. Power tolerance matters too, a +5W tolerance on a large order adds up to real generation over 25 years. A negative tolerance tells you the module might perform below its label.
- Module efficiency. Efficiency is Pmax divided by module area. It tells you how much space you need, which affects racking, land, and installation labor.
- Temperature coefficient of Pmax. This shows how much output drops when the module gets hot. A less negative coefficient, like -0.29%/°C instead of -0.35%/°C, is better for warm climates.
- Degradation warranty. Check the first-year degradation and the linear degradation rate after that. A module that loses 0.55% per year will produce less over its life than one losing 0.40% per year, even if both start at the same wattage.
- Mechanical and safety ratings. Look at wind and snow load ratings, fire class, and whether the product has the right certification for your target market.
- Certification scope. Products should be certified to IEC 61215 and IEC 61730, or UL 61730 for North America. The certificate must list the exact model you are buying, not just a similar model from the same factory.
The specific specs I review change as products change. What I wrote above was accurate for the datasheets I reviewed in January 2026. Verify current model data before you finalize an RFQ.
Should I pay extra for higher module efficiency?
Not always. Efficiency matters more when space is limited, like a commercial rooftop or a substation with a fixed land area. On a ground-mount site where land is cheap, a lower-efficiency module can sometimes give you a lower total system cost per watt.
That said, high efficiency saves more than land. It means fewer panels for the same system size, which means less racking, fewer combiner boxes, less DC wiring, and less installation labor. Those soft costs add up fast.
A 23% efficient module at a slightly higher price per watt can still be the better deal on a tight site. On a wide-open farm with low land cost, the math can go the other way. I'd rather compare installed cost per watt than just module price per watt.
Is a Tier 1 PV module manufacturer automatically a safe choice?
No. The term Tier 1 gets thrown around a lot in procurement, but it is not a quality certification. The Tier 1 label originally came from BloombergNEF and is mainly about bankability, meaning the manufacturer has gotten project financing from major banks. That is useful, but it does not tell you that every production line has good quality control or that the specific module model is right for your project.
A bankable manufacturer can still ship a bad batch. A smaller manufacturer that is not on any tier list can still run a disciplined factory. I treat Tier 1 as a starting point, not a conclusion.
I don't have hard data on how often production output differs from the certified sample. What I can say from experience is that the risk is high enough that we never skip independent verification, no matter how famous the brand is.
How do I actually evaluate a PV module manufacturer?
We use a four-step process, and it has saved us from at least one expensive mistake.
First, document review. We ask for the datasheet, the IEC certificate, the test reports, and the warranty terms. Then we check that the certificate lists the exact model, not a similar one. We also look at who backs the warranty and whether the manufacturer has a local entity we can actually claim against.
Second, financial review. A 25-year performance warranty is only useful if the company still exists in year 10. We look at ownership, annual reports if available, insurance, and whether the brand is supported by a parent company with real assets.
Third, factory qualification. We have visited factories and we have also used third-party auditors. The important thing is to see the QC records from the actual production line: electroluminescence testing, cell sorting data, lamination parameters, and final flash test results. A good factory keeps those records organized.
Fourth, independent sample testing. We randomly sample modules from the delivery batch and send them to an independent lab for IV curve testing and electroluminescence imaging. This catches problems that paperwork cannot reveal.
This is also where I'll admit a bias: our company has bought Seraphim modules for several commercial projects. But that decision came from running this same checklist, not from brand loyalty. We use the same process for every candidate.
Why shouldn't I just pick the lowest price per watt?
Because module price is not the same as project cost. I built a total cost of ownership calculator after learning this the hard way.
On one 5 MW RFQ we ran in 2024, two finalists had very close power ratings and efficiency. One supplier quoted $0.173/W, the other quoted $0.187/W. The cheaper quote looked like an easy win until we added the full landed cost. The lower-priced supplier excluded pallet fees, charged extra for export packing, and had stricter payment terms that increased our financing cost. By the time we put everything into the spreadsheet, the cheap option landed at $0.184/W. The other supplier, at $0.181/W all-in, was actually cheaper once we compared total costs.
The hidden line items to watch for are pallet charges, container loading fees, freight terms, insurance, payment terms, testing costs, and warranty administration fees. Also check whether all quotes include the same Incoterms. Comparing FOB prices against CIF prices is comparing apples to oranges.
That said, I am not telling you to always buy the most expensive module. We buy on value, not on brand name. But the lowest $/W on a quote sheet is not the same as the lowest installed $/W on your project.
What should I check when the modules arrive on site?
Receiving inspection is not optional. A module can look fine from the outside and still have microcracks, faulty bypass diodes, or a swapped Bill of Materials inside.
When a delivery arrives, we check three things. First, the packaging: damaged boxes, broken straps, or water stains on the cartons get photographed immediately. Second, serial numbers: we confirm that the serial number ranges match the shipping documents and the factory production records. Third, electrical performance: we randomly take modules and measure open-circuit voltage and short-circuit current to compare with the label values.
For larger orders, we send samples to an independent lab for electroluminescence testing. EL imaging reveals microcracks that are invisible to the naked eye. It costs money, but it is way cheaper than discovering cracked cells after installation when the labor to replace a module is several times the module cost.
Even after choosing a supplier, I tend to second-guess myself until the first deliveries arrive and the test results come back clean. The only way to relax is to verify instead of assume. That habit has saved us more than once.